嵌入式 STM32F103ZE主要特性

Embest公司的STM32F103ZE ARM Cortex-M3嵌入式評估板采用ST公司的STM32F103ZE處理器,工作頻率72MHz.評估板集成了USB, CAN, SD卡接口, TFT-LCD, RS232串口,四個26引腳的用戶擴展接口以及512KB閃存和64KB SRAM等,主要用于馬達驅動,工業控制,醫療手持設備,PC和游戲機外設,GPS平臺,PLC,逆變器,打印機,掃描儀,告警系統和HVAC.本文介紹了STM32F103ZE主要特性,方框圖,功能模塊圖和ARM-CM3評估板電路圖.

The STM32F103ZE is an ARM embedded evaluation board produced by Embest, integrate the STMicroelectronic ARM Cortex-M3 core-based processor STM32F103ZE, operating at a 72 MHz frequency. The board features USB, CAN, SD Card interface, TFT-LCD, RS232 serial interface, four 26-pin user extended interface, etc. Plenty of software examples, which can be used in Keil MDK environment, are accompanied in CDROM.

Internal memory: 512KB Flash, 64KB SRAM.

External memory: 128KB SRAM, 8M byte SPI Flash, 2MB NOR FLASH, 128MB NAND FLASH

uCOS-II v2.86 ported

Source code of example program

STM32F103ZE ARM-CM3 Board

The STM32F103ZE is an ARM embedded evaluation board produced by Embest, integrate the STMicroelectronic ARM Cortex-M3 core-based processor STM32F103ZE, operating at a 72 MHz frequency, with 512KB Flash memory and 64KB SRAM. The board features USB, CAN, SD Card interface, TFT-LCD, RS232 serial interface, four 26-pin user extended interface, etc. Plenty of software examples, which can be used in Keil MDK environment, are accompanied in CDROM.

These features make the STM32F103xx high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC.

STM32F103ZE主要特性:

◆ Processor：STM32F103ZE，F(xiàn)requency：72MHz

◆ 2MB NOR FLASH

◆ 128KB SRAM

◆ 128MB NAND FLASH

◆ 8M byte SPI Flash

◆ RTC(Including back-up battery)

◆ Start jumper settings

◆ Optional two-way power：5VDC and USB

◆ an SD memory card interface

◆ TFT-LCD interface

◆ A temperature sensor

◆ An audio DAC output

◆ 20Pin JTAG debug interface

◆ Two RS232 serial port

◆ A USB Device interface

◆ A rocker handle with four functions to control the direction

◆ Four keys with functions: Reset, Wakeup, Temper and User button four Led lights

◆ Four LED lighter

◆ Four 8-LED output

◆ a CAN bus interface which lead by the DB9 interface

◆ a AD input

◆ Four user’s interface with 26Pin