為了解決機房監控中數據傳輸實時性差、成本高以及人工巡邏效率低的問題，討論了ARM7的數據采集和串口通信原理，針對惡劣條件下數據傳輸誤差大的特點，提出將GPRS無線通信和高效節能芯片LPC2114相結合的設計方案。既實時、有效地將機房信息傳送到監控中心，又實現了機房的無人值守。在系統組成上提出模塊化設計，模塊之間通信采用RS485通信方式，最大實際傳輸距離可達800 m，該設計既保證了數據的可靠傳輸，又使系統結構更加簡單、性能更加穩定，為以后系統升級提供了條件。在實際應用中，無線數據終端傳輸速率可達40 kbps，完全能夠滿足將各項數據實時地傳輸?shù)奖O(jiān)控中心。

Abstract:

?In order to solve the problem of computer monitoring data transmission in real-time，high cost and low artificial patrol efficiency，this paper discussed the data acquisition of ARM7 and principle of serial communication. And the design scheme combined GPRS wireless communication and the highly effective energy conservation chip LPC2114 was presented because of data transmission error in bad environment，the system not only made the computer information transmit to the monitoring center real-time and effectively，but also realized unmanned watching.In the system composition，this paper proposed modular design，which adopted RS485 communication between communication module whose practical transmission distance can reach the maximum of 800 meters.The design makes the data reliable transmission，the system structure is simple，and the performance is stable，which also provides conditions for the system upgrading in the future.In practical applications，the transmission rate of the wireless data terminal can up to 40kbps，which completely meets the real-time data transmission to the monitoring center.

?

?