資料介紹
全差動放大器組件計算器:FilterPro? Multiple Feedback (MFB) and Sallen-Key Design Program is a Windows application. This application designs MFB and Sallen-Key low-pass and high-pass filters using Voltage Feedback Op Amps, resistors and capacitors. It also supports a fully-differential version of the MFB circuit. This program includes Bessell, Butterworth, Chebychev, and linear phase filter types and can be used to design filters from 1 to 10 poles. The capacitor values in each stage can be either selected by the computer or entered by the designer. An "always on" prompt window provides context-sensitive help information to the user. The response of the filter is displayed on a graph, showing gain, phase and group delay over frequency.
A new version of FilterPro is now available, Version 2.0, that includes band-pass, notch, wide-band-pass, and band-reject circuits.
The FilterPro V2.0 band-pass circuit is based on the MFB circuit. Because the band-pass filter is most often used for tone detection and high Q filters usually need high gain, a method was found to make the gain equal to the Q of the filter. When this is done the sensitivity to variation of the passive components is reduced allowing for a more reproducible filter.
The FilterPro V2.0 notch circuit is a dual amplifier circuit whose sensitivity to variation of passive components is also reduced compared to the traditional twin-T circuit. This filter is often used to block specific tones such as 60 Hz, 120 Hz, 1kHz, etc.
The FilterPro V2.0 wide-band-pass filter uses a high-pass filter cascaded with a low-pass filter. This is very useful for band-pass filters with a Q of less than 1 because the passband response is easily made flat and because the filter types such as Bessell, Butterworth, etc. are used.
The FilterPro V2.0 band-reject filter uses a high-pass filter summed with a low-pass filter. This is useful to block a wide band of frequencies. It is also useful if the gain above the blocked band of frequencies is desired to be different than the gain below the blocked band.
- AMC1100全差動隔離放大器數據表
- 差動放大器和電流檢測放大器
- 低功耗全差動可編程增益放大器參考設計
- 擴展全差動放大器的軌到軌輸出范圍以包括真正零電壓
- 單電源全差動放大器驅動ADC
- MT-068:差動放大器和電流檢測放大器
- AD8208:高壓精密差動放大器
- ADL5561 差動放大器參考設計
- ADL5565 差動放大器參考設計
- 差動放大器的Multisim仿真實例模電原理圖免費下載 50次下載
- 計算器和差動放大器的電源圖詳細資料免費下載 17次下載
- 高共模電壓差動放大器 23次下載
- 差動放大器應用 18次下載
- 單電源全差動放大器驅動ADC 1次下載
- 差動放大電路與集成運算放大器測試習題
- 如何構建簡單的臺式放大器 834次閱讀
- 全差分放大器的評估 1740次閱讀
- 調整固定增益差動放大器的增益 2114次閱讀
- 具有精密電源基準電平轉換的高性能差動放大器 638次閱讀
- 深入了解差動放大器 2572次閱讀
- 差動放大器的特性,差動放大器恒流源的作用 1.4w次閱讀
- 低功耗全差動放大器THS452x系列的特點及應用范圍 1602次閱讀
- 技術 | 內置增益設置電阻的放大器與分立差動放大器的區別 3796次閱讀
- 傳統差動放大器的缺點及解決方案 8184次閱讀
- 電阻的放大器與分立差動放大器有什么區別 4708次閱讀
- 如何利用差動放大器和運算放大器實現低成本精密電流源 7867次閱讀
- 差分放大器的原理,和差分放大器的應用 2.2w次閱讀
- 什么是差動放大器?詳細解析差動放大電路 4.1w次閱讀
- 從生產設計出發談談差動放大器的不足 2344次閱讀
- 幾個經典差動放大器應用電路詳解 9.5w次閱讀
下載排行
本周
- 1DC電源插座圖紙
- 0.67 MB | 2次下載 | 免費
- 2AN158 GD32VW553 Wi-Fi開發指南
- 1.51MB | 2次下載 | 免費
- 3AN148 GD32VW553射頻硬件開發指南
- 2.07MB | 1次下載 | 免費
- 4AN111-LTC3219用戶指南
- 84.32KB | 次下載 | 免費
- 5AN153-用于電源系統管理的Linduino
- 1.38MB | 次下載 | 免費
- 6AN-283: Σ-Δ型ADC和DAC[中文版]
- 677.86KB | 次下載 | 免費
- 7SM2018E 支持可控硅調光線性恒流控制芯片
- 402.24 KB | 次下載 | 免費
- 8AN-1308: 電流檢測放大器共模階躍響應
- 545.42KB | 次下載 | 免費
本月
- 1ADI高性能電源管理解決方案
- 2.43 MB | 450次下載 | 免費
- 2免費開源CC3D飛控資料(電路圖&PCB源文件、BOM、
- 5.67 MB | 138次下載 | 1 積分
- 3基于STM32單片機智能手環心率計步器體溫顯示設計
- 0.10 MB | 130次下載 | 免費
- 4使用單片機實現七人表決器的程序和仿真資料免費下載
- 2.96 MB | 44次下載 | 免費
- 53314A函數發生器維修手冊
- 16.30 MB | 31次下載 | 免費
- 6美的電磁爐維修手冊大全
- 1.56 MB | 24次下載 | 5 積分
- 7如何正確測試電源的紋波
- 0.36 MB | 17次下載 | 免費
- 8感應筆電路圖
- 0.06 MB | 10次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935121次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420062次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233088次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191367次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183335次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81581次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73810次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65988次下載 | 10 積分
評論